AQUA-SHIELD 56 Frame Pool & Spa Motor
Switchless Design 6.5" Frame Dia.
C-Flange Category "C" & "J"
Standard Efficient 7/16-20 Thread
THP Rated 1081 Design
Features:
Two compartment
Shaft Threads - 7/16-20 UNF-2A
50 Degree Ambient
1081 Design
Continuous Duty
Class B Insulated
Open Dripproof
300 Series Stainless Steel Shaft
Thermally Protected
Optimized internal airflow design minimizes heat and moisture buildup inside the motor
Internal bearing cover protects the drive/pump end ball bearing from water and debris that may occur inside of the motor
Three additional layers of drive/pump end bearing protection
AQUA-SHIELD 56 Frame Pool & Spa Motor
Switchless Design 6.5" Frame Dia.
C-Flange Category "C" & "J"
Standard Efficient 7/16-20 Thread
THP Rated 1081 Design
The U.S. Motors Emerson ASB130 C-Face 2 HP Full Rated 56J 230V Pool and Spa Pump Motor is a powerfully designed replacement motor.
Similar to spa and pool replacement motors, the Emerson 56 C-Flange Motor is a two-compartment model with a voltage selection device, running at 2HP and 230V. It is Class B-insulated for efficient operation and has been designed with both sealed ball bearing sand triple bearing protection. The Emerson replacement motor has an open drip-proof design for water damage prevention and is thermally protected.
Please Note: When replacing the motor on the pump, replacing the mechanical pump seal is required to ensure proper installation. Pump seal size varies depending on the pump and not the motor.
Features:
Two compartment
Shaft Threads - 7/16-20 UNF-2A
50 Degree Ambient
1081 Design
Continuous Duty
Class B Insulated
Open Dripproof
300 Series Stainless Steel Shaft
Thermally Protected
Optimized internal airflow design minimizes heat and moisture buildup inside the motor
Internal bearing cover protects the drive/pump end ball bearing from water and debris that may occur inside of the motor
Three additional layers of drive/pump end bearing protection:
Double Sealed Ball Bearing
Lip Seal
Water Slinger
AQUA-SHIELD 56 Frame Pool & Spa Motor
Switchless Design 6.5" Frame Dia.
C-Flange Category "C" & "J"
Standard Efficient 7/16-20 Thread
THP Rated 1081 Design
Features:
Two compartment
Shaft Threads - 7/16-20 UNF-2A
50 Degree Ambient
1081 Design
Continuous Duty
Class B Insulated
Open Dripproof
300 Series Stainless Steel Shaft
Thermally Protected
Optimized internal airflow design minimizes heat and moisture buildup inside the motor
Internal bearing cover protects the drive/pump end ball bearing from water and debris that may occur inside of the motor
Three additional layers of drive/pump end bearing protection
AQUA-SHIELD 56 Frame Pool & Spa Motor
Switchless Design 6.5" Frame Dia.
C-Flange Category "C" & "J"
Standard Efficient 7/16-20 Thread
THP Rated 1081 Design
Features:
Two compartment
Shaft Threads - 7/16-20 UNF-2A
50 Degree Ambient
1081 Design
Continuous Duty
Class B Insulated
Open Dripproof
300 Series Stainless Steel Shaft
Thermally Protected
Optimized internal airflow design minimizes heat and moisture buildup inside the motor
Internal bearing cover protects the drive/pump end ball bearing from water and debris that may occur inside of the motor
Three additional layers of drive/pump end bearing protection
The U.S. Motors Emerson ASB130 C-Face 2 HP Full Rated 56J 230V Pool and Spa Pump Motor is a powerfully designed replacement motor.
Similar to spa and pool replacement motors, the Emerson 56 C-Flange Motor is a two-compartment model with a voltage selection device, running at 2HP and 230V. It is Class B-insulated for efficient operation and has been designed with both sealed ball bearing sand triple bearing protection. The Emerson replacement motor has an open drip-proof design for water damage prevention and is thermally protected.
Please Note:When replacing the motor on the pump, replacing the mechanical pump seal is required to ensure proper installation. Pump seal size varies depending on the pump and not the motor.